High water pressure feels nice in the shower, but it may cost you more than you realize. It may trigger significant problems in your plumbing, such as pinhole leaks, while drastically reducing the life of your water heater, dishwasher, boiler system, and washing machine, raising your water bill.

However, if you spot a leak in a high-pressure water pipe in your home, you probably want to resolve it as soon as possible to prevent additional damage to your property. Since some plumbing problems are fixable, we’ve compiled a list of quick fixes to halt a leak in a high-pressure water line before calling Plumbers in Reno.

Methods To Repair A Leak In A High-pressure Water Pipe

• Turn Off The Water Supply To The Pipe:

Begin by identifying your home’s main control valve and shutting off the water supply to the problematic high-pressure pipe. It will quickly stop the leak and prevent further water from entering your home’s walls, floors, or basement – wherever the faulty pipeline is located.

• Switch On A Neighboring Faucet:

To reduce line pressure in the broken pipe, open a nearby faucet to let the water drain. Look for ways to drain any accumulated water around your home’s floors or basement due to the leak. It may be as simple as opening the sewer/exit line on the house side.

• Clean The Pipe And Coat It With Epoxy:

If you can successfully block the leak with the tip of your finger while the water is running, you can efficiently repair the leak with some quick-drying epoxy. Clean the area surrounding the leak before applying the epoxy to ensure a firm connection. Apply epoxy after washing the afflicted area and allow it to dry. However, if the leak is extensive, consider seeking professional plumbing contractor services in Reno NV, to avoid escalating the problem.

• Place A Clamp Over The Leak:

If the water pressure is so severe that applying epoxy alone is ineffective, a clamp might be the best solution. All you need to do is select a c-clamp that fits the pipe exactly. The interior of the correct clamp must have a rubber. Simply insert the clamp over the hole and tighten it to stop the leak.

• To Quickly Remedy The Problem, Use A Self-tapping Screw:

A self-tapping screw may be ideal for fixing a tiny leak in a high-pressure water line. To correctly close the hole, you’ll need a rubber washer and a self-tapping screw. Drive the screw through the washer into the leak to completely seal it.

How To Check If Your Water Pressure Is High?

Banging pipes, leaking toilets, dripping faucets, and rapidly running out of hot water are all symptoms that your system’s pressure is too high. A water pressure gauge, available at any home improvement store, may be used to test your system. Turn on the water and attach the indicator to any male threaded faucet, such as your laundry tub, hose bib, or water heater drain connection. The recommended pressure for the health of your plumbing system and appliances is between 40 and 60 PSI, and most building regulations require water pressure to be less than 80. If yours reads more than 80 PSI on the gauge, it’s time to reduce the water pressure.

Wrapping Up

To appropriately stop a leak in a high-pressure water pipe, follow the instructions outlined above meticulously. While the procedures outlined above will assist you in preventing a leak in a high-pressure line, remember that they are just temporary remedies. Once you’ve followed these measures to halt the leak, you’ll need to hire a professional plumber to give a permanent solution.