If you are witnessing standing water in your dishwasher after almost every wash, chances are your appliance is malfunctioning.

Now, the obvious solution to this problem is to contact your emergency plumber or plumbing repair contractor.

So, while you are waiting for the professionals, let us explore some of the possible reasons why your dishwasher is acting up, hacks to solve and tips for future maintenance.

Why is your dishwasher malfunctioning?

Standing water in your dishwater can be an indicator of underlying technical issues. Here are some factors that can lead to the same

Interrupted wash time- If your previous wash was interrupted, it can result in stagnant water inside the dishwasher. To avoid that, you can start another circle. However, if the issue persists there may be other factors at play.
Clogging in the garbage disposal line or drain hose- If food particles or debris get stuck in these areas, it can cause clogging, leading to standing water.
Detergent buildup- Using the wrong type of detergent or using too much of it can lead to buildup and clogging.
Dirty filter- This is another common reason for clogged drains and standing water.
Faulty components or error in fitting- If you have recently installed a dishwasher and are already seeing issues with stagnant water, chances are either the dishwasher parts are faulty or the professional has used subpar materials for fitting.

Hacks to fix the standing water in the dishwasher

Now that the reasons are out of the way, let us focus on this step-by-step guide to fix standing water.

. Switch off the power supply.

This is the most important and primary step before you start cleaning out the dishwater, as it will protect you from electric shocks and other safety hazards.

. Clean out the excess water.

If you find a huge quantity of water in the dishwasher scoop it up using a cup. Allow towels and other absorbent materials to soak up the excess.

. Check blockage in the garbage disposal line.

If your dishwasher is connected to the garbage disposal, chances are your disposal line is clogged. Check for stuck food particles, papers or any other object that might be causing obstruction.

. Check the air gap cylinder.

It is usually located behind the sink and near the dishwasher hose to ensure a constant water supply. To check if anything is clogging the supply, open the parts and clean them thoroughly.

. Check the dishwasher filter and the pump.

The filter is usually situated at the bottom of the dishwasher, while the pump has two impellers- one that pumps the water in and the other that pumps the water out. Carefully replace the filter or reach out to your emergency plumber in Reno, NV, or plumbers in Carson City. For the pump, clean out any excess dirt or debris.

. Clean out the Spray Arms

This is another important step that ensures the smooth functioning of your dishwasher. The arms are located at the bottom of the dishwasher cavity and you need to dislodge them to give them a proper cleaning.

. Examine the drain hose and drain valve.

Make sure the hose is tightly fastened, secured, and straightened out. To ensure the valve is in optimal condition press on the valve bracket and examine if it moves freely. This could be a bit tricky so we recommend reaching out to professionals.

. Clear out the drain line with DIY

If you suspect a clogged drain behind your dishwasher malfunctioning, here’s a quick DIY to unclog it. Mix ½ cup vinegar and ½ cup baking soda and make a paste. Pour it into the drain and let it sit for 15 to 20 minutes. The solution might be able to loosen up clogged debris. Finally, pour hot water through the drain to flush out the mixture.

. Start the cleaning cycle to check if the water is getting properly drained.

If you still see standing water, it is best to contact a highly experienced professional. They will be able to locate problems in the technical or internal region.

Is a clogged drain affecting your dishwasher or other appliances? Reach out to Easy Rooter Plumbing for a quick and permanent solution.

Our highly qualified plumber and other professionals are here to provide you with the best quality service at an affordable rate. So, instead of relying on DIYs and temporary hacks, reach out to the best plumbing repair contractor in Reno, NV.

We are available 24/7 for all your plumbing emergencies. Equipped with new-age techniques like Hydro Jetting for Drains and Sewer Lines for clogged drains and carving a sewer line in a couple of hours, no job is too big for our plumbers at Easy Rooter Plumbing. Contact us today!