When it comes to clogging issues, emergency plumbers in Reno, NV, offer an array of solutions. However, the most common among them are hydrojetting and drain snaking. While the latter uses a more traditional method, hydro-jetting is a relatively new procedure that is gaining all the deserved popularity.

Now, if you are considering getting once of these procedures done for your drainage issues, it is important to explore the nuances to understand which one best suits your drainage infrastructure.

What Is Hydro-jetting?

This process includes sending high-pressure water through the plumbing pipes. The specialized nozzle attached to the hose puts a pressure as high as 3000 PSI to 8000 PSI. this procedure is great to get rid of all types of debris, sediments, grease and other types of build-up.

Pros Of Using Hydro-jetting

Hydro-jetting in Sparks is extremely effective in not just clearing out all the debris, mineral deposits and bacteria but also thoroughly cleaning the inside of the pipes.

Efficiency– If you have stubborn build-up inside your pipes, hydro-jetting is the solution to all your plumbing problems.
Prioritizes sanitation– Did you know that the over-the-counter chemical drain cleaners are actually extremely harsh on your plumbing system? In fact, they can damage your pipes. That is why hydro-jetting is an extremely effective procedure to sanitize your plumbing system, as it gets rid of all the build-up and bacteria.
In-depth cleaning– Hydro-jetting, owing to its high-pressure process, is known for thoroughly cleaning up your pipes.

Cons Of Hydro-jetting

While it is an effective procedure, hydro-jetting in Sparks also has its fair share of disadvantages.

Too Strenuous– When it comes to weak or old pipes, hydro-jetting is not a good option, since the high pressure can lead to the breakdown of the pipes or the plumbing infrastructure.
Not invincible– While the hydro-jetting process is known for clearing out all types of build-up, it is not effective when it comes to cleaning drain lines that are damaged due to bellied lines.

What Is Drain Snaking?

Owing to how simple the drain snaking process is, it has been traditionally used to remove clogs. It includes the use of a tool called a plumber’s snake, which is a thin and flexible auger. First, the coiled wire of the snake is inserted down the pipe and the user twists it so the snake can access the turns of the pipe. Finally, the tip of the wire either breaks or moves away to dislodge the clog.

Pros Of Drain Snaking

As a tried and tested method, drain snaking has several benefits. Here are a few-

Simplicity– drain snaking is an extremely simple and non-complex process that does not require any preparation.
Affordable– All you need for drain snaking is a plumber’s snake. That’s all! No fancy equipment or tool is required for this procedure, thereby saving you money.
Non-hazardous– There is rarely any other procedure as simple, effective, and safe as drain snaking. It can easily dislodge stubborn clogs and clear away your pipes.

Cons Of Drain Snaking

Let us take a look at the possible disadvantages of using drain snaking.

Further damage– With the use of the plumber’s snake, there is always a risk of further damage to the pipes. This happens when the snake is too wide to get through the pipe and, hence, scratches the inside of the pipe, causing damage.
Not always effective– Sometimes, a plumber’s snake is not strong enough to get rid of really complex and tough clogs.
Possible leaks– Sometimes, using drain snaking can lead to leaks due to improper or too much force. This, in turn, can damage the pipes.

Hydro-jetting Or Drain Snaking- Which Is Better For You?

Factors	Hydro-jetting	Drain Snaking
Effectiveness	If you have stubborn clogs, using the hydro jetting procedure might be more beneficial since it uses tremendous high-pressure.	Drain snaking, on the other hand, physically breaks up the clog, making it not as effective when it comes to really tough clogs.
Scope for pipe damage	Hydro-jetting in Sparks can cause damage if your pipes are fairly old and damaged.	Hence, drain snaking is a better option if you are looking at removing clogs from old and damaged pipes since it is relatively less harsh.
Cost-effective	Hydro-jetting is more expensive.	Drain snaking is less costly than hydro-jetting since it uses only one tool. However, it is as, if not more effective, than hydrojetting.
Localized clogs	Hydro-jetting is not necessary when it comes to minor or localized clogs	Drain snaking is the best option in such cases.

Are You Looking For A Highly Skilled Plumbing Repair Contractor in Reno, NV For Frequent Pipe Clogs? Look No Further Than Easy Rooter.

Our highly qualified plumber and other professionals are here to provide you with the best quality service at an affordable rate. So, instead of relying on DIYs and temporary hacks, reach out to the best emergency plumber in Reno, NV.

We are available 24/7 for all your plumbing emergencies. Equipped with new-age techniques like Hydro Jetting for Drains and Sewer Lines for clogged drains and carving a sewer line in a couple of hours, no job is too big for our plumbers at Easy Rooter Plumbing. Contact us today!