So you are getting ready for that one important meeting which you have been preparing for several weeks. You are confident that nothing can go wrong.

That is until you turn on the shower, and a blast of cold water ruins what was supposed to be a relaxing experience. Now, you are half as confident as you were a few minutes before and trying desperately to get hold of your emergency plumbing contractor in Reno, NV.

If you have had this misfortune, then you are probably wondering what to do next. But before that, let’s explore why your shower has no hot water.

Reasons For No Hot Water Supply In Your Home

Listed below are some of the primary reasons your shower has only cold water.

An undetected leak

If your shower has run out of hot water, chances are you have a gas, water, or valve leak. Not just one of the primary reasons for water heater issues, gas leaks can also lead to fire hazards in your home.

Solution – Before reaching out to your plumbing contractor in Reno, you should make sure the main valve and other secondary valves are shut off and there is no leak in the lines.

After checking on the water leaks, it is time to check for gas leaks. If you come across an unusual smell, such as rotten eggs, this may be an indication. So now that you are on the clock to protect yourself and your family from a safety breach, here’s what you should be doing.

Do not use your mobile phone or any other electronic device around the suspected leak.
Do not switch on or off any electrical appliances.
Switch off all gas valves.
Do not light a match or any fire starter.
Gather your families around at a safe distance from the leak and wait for the authorities.

Issues With The Pilot Light Or Spark Ignitor.

Pilot light going out can be another major reason why your shower doesn’t have hot water. This happens when the water heater does not have enough gas pressure to make the water hot until it reaches a certain temperature.

Solution- Here is a list of the things that you should follow-

First, wait for the gas to disperse and switch off the regulator for 5 to 7 minutes.
Then, move your regulator to ‘pilot’ mode and switch it on.
If your heater has a self-ignition mechanism, we recommend holding the ignition down for at least a minute or two and using a long lighter to alight it.

Electrical Or Thermostat Issues

If your main electrical supply station or thermostat is malfunctioning, it can temporarily stop hot water.

Solution – Both of these issues demand immediate attention.

For electrical issues- In this case, you can check for loose connections and wires and reset the heating system to enjoy the warm flow of water.
For thermostat issues- the optimal temperature on the thermostat for consistent warming is between 120 to 145 Fahrenheit. If your thermostat is malfunctioning, it can cause water heater issues. Therefore, we recommend reaching out to emergency plumbing contractors in Sparks, NV .

Size Of Your Water Heater Tank

Your water heater tank size plays a more important role in the quality of heating than you think. If your tank is too small, it will not be able to hold the warm water for a long time. However, if the tank is too large for your needs, it may cool down due to lack of requirement.

Solution- Therefore, we suggest consulting a plumbing contractor in Reno, NV to better understand the water tank size you should get.

Reasons For No Hot Water Only In The Shower

The causes of running hot water in your tap and other areas but not in your shower are much different than no hot water in the house. The former can be attributed to

Issues With The Shower Mixing Valve

If the valve that gives you the perfect temperature water by mixing both hold and cold ones together causes issues, it can lead to a bitter cold shower.

Solution-
The solution can be both simple or complex, depending on the issue. However, we recommend only reaching out to professional plumbers to seek out the best solution.

Anti-scald Device Settings

This device is an important installment in your water heater system since it allows you to manage the hot water without making it scalding hot.

Solution-
If your anti-scalding system is set too high, it may cause hot water disruptions. Therefore, you probably need to readjust it to make it work properly.

Facing Issues With Hot Water In Your Shower? Contact Our Plumbing Professionals At Easy Rooter.

Our services are specially tailor-made for your plumbing needs, so you never have to worry about reaching out to different technicians. With a smooth and transparent 24/7 service, Easy Rooter allows you to unlock a worry-free life with quick and easy plumbing solutions. Now, no matter how major or minor your plumbing problem is, we are here to help. That’s what makes us the best plumbing contractor in Reno, NV.

Your satisfaction is our commitment and driving force. Hence, we are always buckled up with the best of equipment and skills to meet your needs. Contact us today to make the best of our offers and services!